Compaq StorageWorks 1000 - Modular Smart Array Manual de servicio descargar pdf (Pagina 71)

Removing or ins

talling a Fibre Channel interconnect blank

Before you begin

CAUTION:

• Before removing a component or blanking panel from an operational device, make sure that you

have the replacement part available. Removing a component or blank impacts the airﬂow and

cooling ability of the device. To avoid possible overheating, insert the new or replacement component

within one or two minutes. If the internal temperature exceeds acceptable limits, the device may

overheat and automatically shut down or restart.

• Parts can be damaged by electrostatic discharge. Use proper anti-static protection.

Removing an interconnect blank

1. Loosen the thumbscrew that holds the blank in place (1).

2. Remove the blank from the back of the unit (2).

15568

Installing an interconnect blank

Place the blank into the MSA chassis bay and tighten the thumbscrew that holds the panel in place.

maintenance and service guide

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 121 122

Sin comentarios

Compaq StorageWorks 1000 - Modular Smart Array Manual de servicio Pagina 71