Compaq Armada 1120T Especificaciones Pagina 85

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 147
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 84
Removal and Replacement Procedures
Maintenance and Service Guide 5–21
2. Slide the processor lever to the left 1 and then swing it up
and forward 2 until it is vertical (Figure 5-12).
3. Lift the outside edges of the processor straight up to remove it
from the system board 3.
When replacing the processor, make sure the processor is seated
in the processor socket with the gold triangle in the rear left
corner 4.
If there is any thermal pad residue on the processor 5, use a
plastic straight edge tool (such as a credit card) to remove it.
Refer to Section 5.9, Heat Sink, for instructions on replacing
the thermal pad on the heat sink.
Figure 5–12: Removing the Processor
Ä
CAUTION: Do not use any metal tools when removing thermal pad
residue from the heat sink or processor. Failure to follow this
caution can result in damage to these components and system
failure.
Vista de pagina 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 146 147

Comentarios a estos manuales

Sin comentarios