Compaq Switch 6 Guía de usuario descargar pdf (Pagina 55)

Managing a power-on password

To set, change, or delete this password, follow these steps:

1. Open Setup Utility by turning on or restarting the computer, and then pressing f10 while the “F10

= BIOS Setup Options” message is displayed in the lower-left corner of the screen.

2. Use the arrow keys to select Security > Set Power-On Password, and then press enter.

●

To set a power-on password, type your password in the Enter New Password and Confirm

New Password fields, and then press enter.

●

To change a power-on password, type your current password in the Enter Current

Password field, type a new password in the Enter New Password and Confirm New

Password fields, and then press enter.

●

To delete a power-on password, type your current password in the Enter Current

Password field, and then press enter 4 times.

3. To save your changes and exit Setup Utility, use the arrow keys to select Exit > Exit Saving

Changes.

Your changes go into effect when the computer restarts.

Entering a power-on password

At the Enter Password prompt, type your password, and then press enter. After 3 unsuccessful attempts

to enter the password, you must restart the computer and try again.

Using passwords 47

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 84 85

Sin comentarios

Compaq Switch 6 Guía de usuario Pagina 55