Compaq Compaq TCP/IP Services for OpenVMS Manual de servicio Pagina 176

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 504
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 175
Configuring the DHCP Server
7.5 Using DHCP GUI to Configure DHCP
7.5.3.4.6 Link Parameters Link Layer parameters affect the operation of the
Link layer on a per-host basis.
ARP Cache Timeout
Specifies the timeout in seconds for ARP cache entries. The time is specified as a
32-bit unsigned integer.
Ethernet Encapsulation
If it is an Ethernet interface, use this option to specify whether the client should
use Ethernet Version 2 (RFC 894) or IEEE 802.3 (RFC 1042) encapsulation.
The following are valid values:
False: Use RFC 894 encapsulation.
True: Use RFC 1042 encapsulation.
Trailer Encapsulation
Specifies whether the client should negotiate the use of trailers (RFC 893) when
using the ARP protocol.
The following are valid values:
False: Client should not attempt to use trailers.
True: Client should attempt to use trailers.
7.5.3.4.7 NetBIOS Parameters NetBIOS parameters configure NetBIOS related
parameters on a per-host basis.
NetBIOS Datagram Distribution Server
Specifies a list of RFC 1001/1002 NBDD servers listed in the order of preference.
Use this format: ddd.ddd.ddd.ddd.
NetBIOS Name Server/WINS Server
Specifies a list of RFC 1001/1002 NBNS name servers listed in the order of
preference.
Use this format: ddd.ddd.ddd.ddd.
NetBIOS Node Type
Allows you to configure NetBIOS-over-TCP/IP clients as described in RFC
1001/1002. Specify the value as a single octet (from 0 to 255) that identifies
the client type as shown in Table 7–7.
Table 7–7 NetBIOS Node Type and Value
Node Type Value (hexadecimal)
B-node 1
P-node 2
M-node 4
H-node 8
Note
The NetBIOS over TCP/IP clients must be configurable.
7–46 Configuring the DHCP Server
Vista de pagina 175
1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 503 504

Comentarios a estos manuales

Sin comentarios