Compaq esl9326d Manual de usuario descargar pdf (Pagina 9)

We also recommended that you do not place storage on shared

SCSI buses that have tape drives.

The following sections describe how to prepare the ESL9326D Enterprise

Library in more detail.

1.3.1 ESL9326D Enterprise Library Robotic and Tape Drive Required

Firmware

Library electronics firmware V1.22 is the minimum firmware version

that supports the TruCluster Production Server Software Version 1.6 and

TruCluster Available Server Software Version 1.6 products.

The 35/70 DLT tape drives require V80 or later firmware (V97 is available).

1.3.2 Library Electronics and Tape Drive SCSI IDs

Figure 1–1 shows the default robotics and tape drive SCSI IDs. If these

SCSI IDs are not acceptable for your configuration and you need to change

them, follow the steps in the Compaq StorageWorks ESL9000 Series Tape

Library

Reference Guide.

1.3.3 ESL9326D Enterprise Library Internal Cabling

The default internal cabling for the ESL9326D Enterprise Library is to place

two 35/70 DLT tape drives on one SCSI bus.

Figure 1–1 shows the default cabling for an ESL9326D Enterprise Library

with 16 tape drives. Each pair of tape drives is cabled together internally to

place two drives on a single SCSI bus. If your model has fewer drives, all

internal cabling is supplied. The terminators for the drives that are not

present are not installed on the SCSI bulkhead.

Compaq ESL9326D Enterprise Library 1–3

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Compaq esl9326d Manual de usuario Pagina 9