Compaq BL20p - ProLiant - G2 Guía de instalación descargar pdf (Pagina 20)

Removal and Replacement Procedures

Hot-Plug SCSI Hard Drives

To assess hard drive status, observe the hot-plug SCSI hard drive status LEDs. For a detailed

explanation of these LEDs, refer to Chapter 4, “Connectors, LEDs, and Switches.”

CAUTION: Refer to the HP Servers Troubleshooting Guide before removing a hard drive.

IMPORTANT: It is not necessary to power down the server blade before removing or replacing a

hot-plug SCSI hard drive.

To remove a hot-plug SCSI hard drive:

1. Press the port-colored release button (1).

2. Open the ejector lever (2).

3. Slide the drive out of the drive cage (3).

Figure 2-5: Removing a hot-plug SCSI hard drive

CAUTION: Always populate hard drive bays with either a hot-plug SCSI hard drive or hard

drive blank. Operating the server blade without a hot-plug SCSI hard drive or hard drive blank

results in improper airflow and improper cooling that can lead to thermal damage.

To replace a hot-plug SCSI hard drive:

1. Slide the drive into the cage until it is fully seated.

2. Close the lever, locking the drive into place.

2-8 HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide

HP CONFIDENTIAL Codename: Part Number: 316078-001 Last Saved On: 4/3/03 1:22 PM

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Sin comentarios

Compaq BL20p - ProLiant - G2 Guía de instalación Pagina 20