Compaq NeoServer 150 Guía de instalación descargar pdf (Pagina 11)

Compaq StorageWorks SAN Switch Power Supply Installation Guide

Compaq Confidential – Need to Know Required

Writer: Hilary Stead Project: Compaq StorageWorks SAN Switch Power Supply Installation Guide Comments:

Part Number: EK-P20PS-IA / 161359-001 File Name: EK-P20PS-IA.DOC Last Saved On: 9/30/99 11:27 AM

Specifications

The Compaq StorageWorks SAN Switch Power Supply is a Universal Power

Supply capable of functioning worldwide without voltage jumpers or switches.

The supply is autoranging in terms of accommodating input voltages and line

frequencies. The power supply meets the requirements outlined in the

following table.

Table 1

Power Supply Requirements

Feature Requirement

Total power 150 watts

Input voltage 85 to 265 VAC

Input line frequency 47 to 63 Hz

Inrush current 10 amps peak > 300 usec - hot/cold start

Harmonic distortion Active power factor correction per IEC1000-3-2

Input line protection Fused in both hot and neutral lines

Maximum dimensions H: 1.5 in. (38.1 mm), W: 3.5 in. (88.9 mm), L: 11 in.

(279.4 mm)

Redundancy Dual power supplies - Hot-pluggable

The power supply plugs directly into the enclosure through the front panel,

mating to an internal blind-mate connector. It supports a dual-redundant power

supply configuration, in which the supplies are hot-pluggable.

An integral on/off switch, input filter, and power indicator are provided in the

power supply.

1 2 ... 6 7 8 9 10 11

Sin comentarios

Compaq NeoServer 150 Guía de instalación Pagina 11