Compaq PC CARD ADAPTER Manual de usuario descargar pdf (Pagina 28)

3-4 CHAPTER 3: USING THE AUTOLINK FEATURE FOR NETWARE

This completes the procedure for avoiding conﬂicts with a

memory manager. You are now ready to run the AutoLink

program.

Using the AutoLink Feature

Follow these steps to use the AutoLink feature:

1 Place the TokenDisk diskette in a ﬂoppy drive on your

computer and make that drive the active drive. For

example, type:

A: [Enter]

2 Type at the prompt:

INSTALL [Enter]

The ﬁrst time you use the TokenDisk diskette, the 3Com

license appears.

3 To accept the terms and conditions of the 3Com end-user

software license agreement, type Y.

A status message appears, followed by a prompt asking for

the ring speed.

4 Type the correct ring speed (16 or 4) and press [Enter].

A message appears, stating that the AutoLink program has

completed the conﬁguration.

5 Remove the TokenDisk diskette and reboot your computer.

The login prompt for a NetWare server appears.

6 Log in to the NetWare server using your user ID and

password provided by your network administrator.

The 3C689 adapter is now a NetWare DOS ODI client.

Installation and conﬁguration are complete. If you have

problems, see Chapter 6, “Troubleshooting,” for help.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 75 76

Sin comentarios

Compaq PC CARD ADAPTER Manual de usuario Pagina 28