Compaq 2000 Manual de usuario Pagina 58

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 91
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 57
5-6 Compaq 2000 Series UPS Operation and Reference Guide
Step 2: Removing the External Battery Module
Use this procedure to remove the external battery module:
1.
Disconnect the battery cables from the UPS.
CAUTION: It is normal for a small amount of electrical arcing to occur when
disconnecting an external battery module from a UPS. To minimize the amount
of arcing, remove the battery cables quickly and firmly.
Battery
Module
COMM. PORT
COMM. PORT
M. PORT
Figure 5-2. Disconnecting an external battery module
2.
Set the used external battery module aside to install the replacement
module.
CAUTION: Load devices will not be protected from utility power failure until the
battery module is successfully replaced.
Vista de pagina 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 90 91

Comentarios a estos manuales

Sin comentarios