Compaq Ultra SCSI Adapter Guía de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 49
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
24
8. Replace the graphics board if one was removed
9. Re-attach any SCSI cables which were removed
10. Attach the I/O bulkhead to the cutout at the rear of the system,
with the screws provided. Be careful to route the cable in a
way that will not interfere with other system components or
the system cover.
Attaching the I/O bulkhead and internal SCSI Cable
Figure 9: DS-KZCCA-BB I/O bulkhead Installed
11. Replace the system cover, and all external cables.
Retaining
Screw
68 Pin HVD
SCSI Connector
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 48 49

Comentarios a estos manuales

Sin comentarios