Compaq 6000 Manual de usuario descargar pdf (Pagina 115)

Getting Started 8–13

Upgrading the Computer

Replacing or Adding a Drive

The steps to replace or add a drive are the same

for both the 6000 and 8000 models, except

when you are replacing a diskette drive on the

8000 model. If you are replacing a diskette drive

on the 8000 model, before starting step 1 in the

following instructions, you need to fit the diskette

drive in a diskette drive adapter as described

in “Reassembling the Diskette Adapter” on

page 8–16.

If you are replacing or adding any drive other

than a diskette drive on the 8000 model, begin

with step 1 in the following instructions.

To Replace or Add a Drive

1. Install four guide screws on the sides of the

drive (two on each side). The screws help

guide the drive into its proper position in the

bay.

❏ When replacing a drive on either the

6000 and 8000 model, place the screws

that you removed from the old drive in the

new drive.

❏ When adding a second hard drive on

the 8000 model, use the four extra guide

screws that are attached to the chassis

under the front bezel.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 141 142

Sin comentarios

Compaq 6000 Manual de usuario Pagina 115