Compaq Portable 486 - Notebook PC Especificaciones descargar pdf (Pagina 75)

Chapter 5.14 Active Matrix Color Display

Front Bezel

To remove the front bezel, complete the following steps:

1. Remove the keyboard (Section 5.5).

2. Pull the brightness and volume controls off (Figure 5-20).

3. Remove four plastic screw covers from the front bezel (Figure 5-20).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

WARNING

The display inverter board contains high voltage. Avoid contact with all

surfaces of the display inverter board when removing the front bezel.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

4. Using a Torx T-15 screwdriver, remove four Plastite screws securing the

front bezel (Figure 5-20).

5. Pull the front bezel out from the display assembly (Figure 5-20).

To replace the front bezel, reverse the steps in the above illustration.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 87 88

Sin comentarios

Compaq Portable 486 - Notebook PC Especificaciones Pagina 75