Compaq Wireless LAN 100 Especificaciones descargar pdf (Pagina 48)

Memory module

Description Spare part number

2048-MB (PC2-5300, 667-MHz, DDR2) 417506-001

1024-MB (PC2-5300, 667-MHz, DDR2) 414046-001

512-MB (PC2-5300, 667-MHz, DDR2) 414045-001

Before removing the memory module, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see

Battery on page 37).

Remove the memory module:

Position the computer with the front toward you.

2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the memory module compartment

cover to the computer.

3. Lift the left side of the cover (2), swing it up and to the right, and remove the cover. The memory

module compartment cover is included in the Plastics Kit, spare part number 454010-001.

4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.

(The edge of the module opposite the slot rises away from the computer.)

40 Chapter 4 Removal and replacement procedures

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 148 149

Sin comentarios

Compaq Wireless LAN 100 Especificaciones Pagina 48