Compaq HSZ80 Guía de instalación descargar pdf (Pagina 5)

Service Guide

EK-HSG80-UP. B01 Page 5

3.0 Hardware Inventory

Before starting the upgrade procedure ensure that all of the following material is available.

1. HSG80 Hardware – One or two of each of the following depending on the configuration of

the HSZ70 that is being upgraded:

• HSG80 Controller(s) with factory default settings, including cache.

(see Appendix B for resetting controller(s) to default state)

• Fibre Optic GLM Module(s) (included with controllers).

• HSG80 External Cache Battery (ECB) Battery Cable(s) (with controllers)

• PCMCIA Card(s) with Version 8.3 or 8.4 Firmware

• Version 8.3 or 8.4 Solution Software for the Target Server Operating System

• HSG80 World Wide Name (WWN) Node ID Number and Checksum Label (Included with

controllers)

2. Server – One or two of each of the following depending on the target HSG80 configuration.

• Fibre Channel Host Adapter(s)

• Fibre Channel Hub or Switch

• Giga-Bit Interface Converter(s), GBIC, for the Fibre Channel Hub or Switch – one for

each connection.

• Fibre Optic Cables for controller to hub/switch connections and from HBA to hub/switch

connections.

• SGI IRIX Only - Media Interface Adapter(s), MIA one for each SGI Fibre Channel Host

Adapter, SGI P/N: X-F-OE-KIT

Part Numbers for the above mentioned items are located in Appendix C.

1 2 3 4 5 6 7 8 9 10 ... 27 28

Sin comentarios

Compaq HSZ80 Guía de instalación Pagina 5