Compaq CP-2E Guía de usuario descargar pdf (Pagina 66)

Advanced Setup Icons

iPAQ Connection Point CP-2E User Guide 5–19

3. Type the IP address that you wish to exclude into the IP Address

field.

4. If you wish, you can type a brief description into the Comment field.

5. Click Apply. The Connection Point CP-2E must be rebooted for

applied changes to take effect.

6. Click OK. You can reboot the Connection Point CP-2E at any time by

clicking the Reboot button at the left.

BOOTPIP Table

The BOOTP IP Table allows you to reserve IP addresses for devices that

use the BOOTP protocol for TCP/IP network configuration. These values

are based on MAC addresses.

You must have the MAC address of each client device for which you wish

reserve an IP address.

Adding a BOOTP IP Address

1. Click BOOTP IP Table. The BOOTP IP Table page is displayed.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 90 91

Sin comentarios

Compaq CP-2E Guía de usuario Pagina 66