Compaq EK-ASIP2-OG. D01 Especificaciones descargar pdf (Pagina 27)

Installing the AlphaServer IP Platform Hardware

AlphaServer Intelligent Peripheral Platform Hardware Owner's Guide

2–5

2.4.1.1.1

Connecting Dialogic D/240SC-T1 and DTI/211 T-1 Modules

On the rear bracket of the D/240SC-T1 and DTI/211 network modules is an RJ-48C jack for

connecting to the T-1 network. The cabling between this jack and the CSU or other DSX-1

equipment should be 4-pair telephone line or equivalent. The network interface module of the

cable should consist of an RJ-48C plug. The user is responsible for supplying an appropriate

cable for these connections. The pin designations for the network interface module cable end

for D/240SC-T1 modules are specified in Table 2-1.

Table 2-1: T-1 to D/240SC-T1 Pin Designations

Signal Pin(s)

Receive ring: input to network interface module 1

Receive tip: input to network interface module 2

No connection 3, 6

Transmit ring: output from network interface module 5

Transmit tip: output from network interface module 4

Optional shield 7, 8

The pin designations for the network interface module cable end for DTI/211 T-1 modules

are specified in Table 2-2.

Table 2-2: T1 to DTI/211 Pin Designations

Signal Pin(s)

Receive ring: input to network interface module 1

Receive tip: input to network interface module 2

No connection 3, 6

Transmit ring: output from network interface module 4

Transmit tip: output from network interface module 5

Optional shield 7, 8

Refer to the Dialogic Network Hardware Reference for additional information on DTI/211 T-

1 modules. Refer to the Dialogic Voice Hardware Reference for additional information on

D/240SC-T1 modules.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 77 78

Sin comentarios

Compaq EK-ASIP2-OG. D01 Especificaciones Pagina 27