Compaq AlphaServer 160 Guía de usuario Pagina 117

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 181
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 116
Operation 7-7
7.2 Displaying the System Configuration
View the system hardware configuration from the SRM console. It is
useful to view the hardware configuration to ensure that the system
recognizes all devices, memory configuration, and network
connections.
Use the following SRM console commands to view the system configuration.
Additional commands to view the system configuration are described in the
AlphaServer GS80/160/320 Firmware Reference Manual.
show boot*
Displays the boot environment variables.
show config
Displays the logical configuration of interconnects and buses
on the system and the devices found on them.
show device
Displays the bootable devices and controllers in the system.
show fru
Displays the physical configuration of FRUs (field-replaceable
units).
show memory
Displays configuration of main memory.
7.2.1 Show Boot Command
Use the show boot* command to list the boot environment variables.
Example 72 Show Boot*
P00>>> show boot*
boot_dev dka0.0.0.1.1
boot_file
boot_osflags a
boot_reset OFF
bootdef_dev dka0.0.0.1.1
booted_dev
booted_file
booted_osflags
Vista de pagina 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 180 181

Comentarios a estos manuales

Sin comentarios