Compaq ProLiant MicroServer Gen8 Guía de usuario descargar pdf (Pagina 50)

Hardware options installation 50

Press the optical drive blank release latches, and then pull the blank out of the drive bay.

Retain the blank for future use.

6. Install the optical drive into the bay.

7. Connect the optical drive SATA Y-cable:

a. Connect the common end of the Y-cable to the optical drive.

b. Connect the power end of the Y-cable to the power supply cable labeled P3.

c. Route the data end of the Y-cable through the left side chassis opening down to the system board.

d. Connect the data end of the Y-cable to the system board SATA connector.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 98 99

HP ProLiant MicroServer Gen8 1
User Guide 1
Contents 3
Contents 4 4
Contents 5 5
Component identification 6
Front panel LEDs and buttons 7
Rear panel components 8
Rear panel LEDs and buttons 9
System board components 9
Item Description 10
DIMM slot locations 11
System maintenance switch 11
Drive numbering 12
FBWC module LED definitions 13
Fan location 14
T-10/T-15 Torx screwdriver 14
Operations 15
Open the front bezel 16
Remove the front bezel 17
Install the front bezel 18
Remove the chassis cover 19
Install the chassis cover 19
Operations 21 21
Operations 22 22
Optimum environment 23
Temperature requirements 24
Power requirements 24
Server warnings and cautions 25
Installing hardware options 25
Setup 26 26
• Dedicated iLO connector 27
Connecting the power cord 28
Configure the drive 30
Click Create Array 31
Setup 32 32
Install the operating system 33
Registering the server 34
Setup 35 35
Complete the switch setup 40
Introduction 41
Bezel faceplate 41
Drive options 43
Controller options 45
Optical drive option 49
Memory options 52
ECC memory 53
Installing a DIMM 54
Expansion board options 55
Cabling 60
Capacitor pack cabling 61
Optical drive cabling 62
Front I/O assembly cabling 62
System fan cabling 63
Power supply cabling 64
Server mode 65
HP product QuickSpecs 65
HP iLO Management Engine 65
Active Health System 66
Intelligent Provisioning 67
HP Insight Diagnostics 68
Erase Utility 68
HP Insight Online 69
Scripting Toolkit 69
HP Service Pack for ProLiant 70
HP ROM-Based Setup Utility 71
Boot options 72
Utilities and features 73
ROMPaq utility 74
Automatic Server Recovery 74
USB support 74
Keeping the system current 75
Software and firmware 76
Version control 76
ProLiant servers 76
Troubleshooting 78
System battery replacement 79
Regulatory information 80
Electrostatic discharge 81
Specifications 82
Specification Value 83
Support and other resources 84
Customer Self Repair 86
Reparo feito pelo cliente 88
Acronyms and abbreviations 92
Virtual Connect 95
Version Control Agent 95
Documentation feedback 96
Index 97 97
Index 98 98
Index 99 99

Comentarios a estos manuales

Sin comentarios

Compaq ProLiant MicroServer Gen8 Guía de usuario Pagina 50

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores Compaq ProLiant MicroServer Gen8