Compaq ProLiant MicroServer Gen8 Guía de usuario descargar pdf (Pagina 7)

Component identification 7

Front panel LEDs and buttons

Item Description Status

Power On/Standby button

and system power LED

Solid green = System on

Flashing green (1 Hz/cycle per sec) = Performing power on sequence

Solid amber = System in standby

Off = No power present*

NIC status LED Solid green = Link to network

Flashing green (1 Hz/cycle per sec) = Network active

Off = No network activity

Drive status LED Solid green = System on

Flashing green = Drive activity

Off = System in standby or no power present

Health LED Solid blue = Normal

Flashing amber = System degraded

Flashing red (1 Hz/cycle per sec) = System critical

Fast-flashing red (4 Hz/cycles per sec) = Power fault**

* Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has

occurred, or the power button cable is disconnected.

** To identify components in a degraded or critical state, see the iLO/BIOS logs and the server troubleshooting guide.

1 2 3 4 5 6 7 8 9 10 11 12 ... 98 99

Sin comentarios

Compaq ProLiant MicroServer Gen8 Guía de usuario Pagina 7