Compaq Contec COM-2(PC)F Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 77
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
How to Use the Board
COM-2(PC)F18
Operating under Windows NT
This section describes the procedure for using the board under
Windows NT and lists a number of points to note.
Procedure
First, set the operation mode (I/O address) and interrupt level for
the COM-2(PC)F. Set the COM-2(PC)F switch and jumpers as
described in Hardware Setup.
When using the board in compatible mode, the OS must be set to
recognize the I/O address and interrupt level used by the
COM-2(PC)F. Use the Ports icon in Control Panel to set the I/O
address and interrupt level.
The I/O address and interrupt level used by the COM-2(PC)F do not
need to be set for the OS when using the board in enhanced mode.
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 76 77

Comentarios a estos manuales

Sin comentarios