Compaq TL891 - DLT Tape Library Guía de usuario descargar pdf (Pagina 41)

DLT MiniLibrary (TL891) - User’s Guide

3–2 EK–TL891–UG. A01

CAUTION

The cleaning cartridge is abrasive, and should not

be used unless the

Use Cleaner

LED comes on.

To determine which drive requires cleaning on

two-drive models, unload both drives and select

‘Cleaning Needed’ on the Drive Status submenu of

the Show Status menu.

3.1.1 Installing a Cleaning Cartridge

1. Examine the Default Screen on the Control Panel to determine whether

any cartridges are loaded into the drives. If so, then unload each as

described in Chapter 2 - Operation.

2. Using the key provided (if necessary), unlock the Magazine Security

Lock on the front panel.

3. Press the

Unlock/Open

Button on the front panel.

4. Remove the magazine from the Base Module.

5. Remove any cartridge present in Slot 0 (the slot farthest from the

handle).

6. Insert the cleaning cartridge into Slot 0. You can use any slot, but using

Slot 0 saves some keystrokes.

7. Press the

Unlock/Open

button on the front panel.

8. Insert the magazine into the Base Module.

3.1.2 Running the Cleaning Cartridge

This procedure assumes that the cleaning cartridge has been installed into Slot 0

of the magazine.

1. At the Default Screen, press the

Enter

button. The display will show

the following.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 112 113

Sin comentarios

Compaq TL891 - DLT Tape Library Guía de usuario Pagina 41