Compaq TL891 - DLT Tape Library Guía de usuario Pagina 90

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 113
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 89
Appendix B - Installation
EK-TL891-UG .A01 B-9
b) Using mounting screws (P/N 213164-108), mount the slide bracket
assembly using the two mounting holes marked 2, 3, or 4 to mount
the second, third or fourth module respectively. Start by mounting
the slide/bracket assembly to the rear of the StorageWorks cabinet.
Hold the bracket/slide assembly in place with one hand, fasten the
mounting screw to the bracket holes marked with a number that
corresponds to the module number.
c) Be careful to mount all four brackets at the same height. You can
use a ruler or count the hole numbers to achieve this.
d) Tighten all four corners and the slide extension.
Figure B-4 Metric Rackmount Installation Layout
Vista de pagina 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 112 113

Comentarios a estos manuales

Sin comentarios