Compaq 380 Especificaciones descargar pdf (Pagina 85)

4-6 Compaq ProLiant DL380 Generation 2 Server Maintenance and Service Guide

The internal health LED identifies service events for internal components in a pre-failure or

failed condition. Use Table 4-9 to identify LED combinations for the internal health LED and

the system LEDs.

Hot-Plug SCSI Hard Drive LEDs

Each hot-plug SCSI hard drive has three LEDs located on the front of the drive. The LEDs

provide activity, online, and fault status for each corresponding drive configured as a part of an

array and attached to a powered-on Smart Array Controller. The indicators may vary depending

on the status of other drives in the array. Use Figure 4-4 and Table 4-4 to analyze the status of

each hot-plug SCSI hard drive.

WARNING: To avoid personal injury read the “Hot-Plug Hard Drive Replacement Guidelines” in

the Compaq Servers Troubleshooting Guide before removing a hard drive.

Figure 4-4. Hot-plug SCSI hard drive LEDs

■ The LED on the left indicates drive activity status , where ON indicates activity and

OFF indicates no activity by the drive.

■ The center LED indicates online status , where flashing indicates an active online

condition and OFF indicates an inactive online condition.

■ The LED on the right indicates fault status , where flashing indicates fault-process

activity and OFF indicates a no fault-process activity.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 120 121

Sin comentarios

Compaq 380 Especificaciones Pagina 85