
Removal and Replacement Procedures
Maintenance and Service Guide 5–39
9. Press in and hold the PC Card eject button 1 (Figure 5-28).
10. Lift up the front edge of the system board 2 until it clears the
base enclosure.
11. Slide the front edge of the system board forward, away from
the base enclosure, at an angle 3.
Figure 5-28. Removing the System Board
Refer to the following sections to remove components from the
system board:
■ Memory expansion board (Section 5.4)
■ Fan assembly (Section 5.8)
■ Processor (Section 5.9)
■ Disk cell RTC battery (Section 5.13)
■ Mini PCI communications board (Section 5.14)
Reverse the above procedure to install the system board.
Comentarios a estos manuales