
Removal and Replacement Procedures
Maintenance and Service Guide 5–21
5. Insert a small straight edge tool (screwdriver or tweezers) into
the notch 1 in the hinge cover and partially lift the hinge
cover 2 (Figure 5-15).
6. When the hooks 3 on the inside and outside edges of the
hinge covers are exposed, press in on the edges of the hinge
covers to disengage them from the top cover.
7. Remove the hinge covers 4.
✎
The hinge covers are included in the Plastics and Hardware Kit
(spare part number 251365-001).
8. Remove the four silver M2 × 10.5 screws 5 from the
computer rear panel.
Figure 5-15. Removing the Hinge Covers and Display Screws
Comentarios a estos manuales