
5–6 Maintenance and Service Guide
Removal and Replacement Procedures
If the hard drive must be removed from the hard drive sleeve,
perform the following steps:
a. Remove the four black M3 × 4 screws 1 that secure the
hard drive to the hard drive sleeve (Figure 5-4).
b. Lift the hard drive straight up to remove it from the hard
drive sleeve 2.
c. Note the orientation and position of the hard drive
shield 3 when removing the hard drive from the hard
drive sleeve.
✎
The hard drive sleeve and shield are included in the Plastics and
Hardware Kit (spare part number 251365-001).
Figure 5-4. Removing the Hard Drive from the Hard
Drive Sleeve
Comentarios a estos manuales