Compaq StorageWorks 2/24 - Edge Switch Guía de instalación descargar pdf (Pagina 80)

2-54 edge switch 2/32 installation guide

Installing and Configuring the Edge Switch 2/32

Configure Switch Ports

Perform the procedure in this section to configure names and operating characteristics

for the switch ports.

To configure one or more ports:

1. At the View window, click Configure at the left side of the window. The

Configure window opens with the Ports tab displayed.

a. For each port to be configured, type a port name of 24 alphanumeric

characters or less in the associated Name field. The port name should identify

the device to which the port is attached.

b. Choose the check box in the Blocked column to block or unblock a port

(default is unblocked). A check mark in the box indicates the port is blocked.

Blocking a port prevents the attached device from communicating with the

switch. A blocked port continuously transmits the offline sequence (OLS), as

shown in Figure 2–39.

Figure 2–39: Block or unblock a port from the Configure window

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 143 144

Sin comentarios

Compaq StorageWorks 2/24 - Edge Switch Guía de instalación Pagina 80