Compaq ProLiant Storage System U1 Guía de usuario descargar pdf (Pagina 30)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-2 Installation of ProLiant Storage System /U

Compaq ProLiant Storage System /U User Guide

Installing the ProLiant Storage

System /U

To install the ProLiant Storage System /U you will need to perform these steps:

1. Install any options in the storage system

2. Choose a location

3. Install the ProLiant Storage System /U unit

4. Install the hot-pluggable drive(s)

5. Install the SCSI controller(s) in a server (if required)

6. Cable the units together

7. Configure the system

Installing Options

Although it is not difficult to install options at any time, it may be easier to do

so now, before the storage system is placed in its final location. See Chapter 5

in this guide for complete instructions on the installation of each option.

Installation instructions are also included with each option.

Choosing a Location

Choose an installation site with the following features:

Tower Systems

■ A sturdy, level surface, preferably on or near the floor

■ At least 8 inches (20 cm) of clearance at the front of the storage system

for access to the hot-pluggable drives

■ At least 12 inches (30.5 cm) of clearance at the back of the storage

system for proper ventilation, cable access, and maintenance access to

replaceable components

■ A grounded electrical outlet that is easily accessible and located as near

the storage system as possible

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 109 110

Sin comentarios

Compaq ProLiant Storage System U1 Guía de usuario Pagina 30