Compaq AlphaServer DS20 Guía de usuario descargar pdf (Pagina 135)

SRM Console 4-51

Table 4-7 Settings for boot_osflags Bootflags (OpenVMS)

Flags_Value Bit Number Meaning

1 0 Bootstrap conversationally (enables you to modify

SYSGEN parameters in SYSBOOT).

2 1 Map XDELTA to running system.

4 2 Stop at initial system breakpoint.

8 3 Perform diagnostic bootstrap.

10 4 Stop at the bootstrap breakpoints.

20 5 Omit header from secondary bootstrap image.

80 7 Prompt for the name of the secondary bootstrap

file.

100 8 Halt before secondary bootstrap.

10000 16 Display debug messages during booting.

20000 17 Display user messages during booting.

com*_baud

The default baud rate for the system is 9600. With the com*_baud environment

variable, you can set the baud rate to match that of the device connected to the port.

NOTE: Disable the RCM to select a baud rate other than 9600. See Chapter 6.

You will be asked to confirm the change, as shown here:

P00>>> set com1_baud 19200

Embedded Remote Console only supports 9600 baud. Continue?

(Y/[N]) n

bad value - com1_baud not modified

P00>>>

The syntax is:

set com*_baud baud_value

baud_value The new baud rate. A list of possible values is displayed by attempting

to set this environment variable to an unacceptable value (for

example, set com2_baud xxx).

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 235 236

Sin comentarios

Compaq AlphaServer DS20 Guía de usuario Pagina 135