Compaq AlphaServer ES45 3B Especificaciones Pagina 160

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 322
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 159
4-50 ES45 Owner's Guide
9. Partially slide the drive cage
into the system chassis.
10. Connect the power source cable
(located inside enclosure) to the drive
cage.
11. Attach the 10-pin cable
and 68-pin cable to the drive cage.
12. Slide the cage in the rest of the way and attach it with the four screws set
aside previously.
13. Replace fans 3 and 4 (if removed previously), PCI card cage cover, and en-
closure panels.
14. Install disk drives.
CAUTION: Disk drives must be installed from left to right. Otherwise, the sys-
tem will not find the system disk.
15. Plug in the power cords.
Verification
1. Turn on power to the system.
2. At the P00>>> prompt, enter the SRM show device command to display
the devices and controllers in the system. The list should include the SCSI
controller and disk drives that you installed.
Vista de pagina 159
1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 321 322

Comentarios a estos manuales

Sin comentarios