Compaq ProLiant 3000 Especificaciones descargar pdf (Pagina 43)

2-30 Removal and Replacement Procedures

Memory

Compaq ProLiant 3000 Servers ship standard with either 128 MB or 256 MB Synchronous

DRAM (SDRAM) Dual Inline Memory Modules (DIMMs)installed in the DIMM 5 socket

location. Memory can be expanded to a maximum of 4 GB. Install SDRAM DIMM modules one

at a time in the proper socket. See Figure 2-27 and Table 2-2.

The following guidelines MUST be followed when installing or replacing memory:

■ Use only 32-, 64-, 128-, 256- or 512-MB SDRAM DIMMs.

■ Use Compaq SDRAM DIMMs only.

■ SDRAM DIMMs must all be rated 100 MHz and of the same manufacturer.

The recommended SDRAM DIMM installation order is:

■ First SDRAM DIMM in socket 5

■ Second SDRAM DIMM in socket 1

■ Third SDRAM DIMM in socket 6

■ Fourth SDRAM DIMM in socket 2

■ Fifth SDRAM DIMM in socket 7

■ Sixth SDRAM DIMM in socket 3

■ Seventh SDRAM DIMM in socket 8

■ Eighth SDRAM DIMM in socket 4

The following drawing shows the SDRAM DIMM socket locations.

SOCKET 1 SOCKET 2 SOCKET 3 SOCKET 4

SOCKET 5

SOCKET 6

SOCKET 7

SOCKET 8

Figure 2-27. SDRAM DIMM socket locations

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 161 162

Sin comentarios

Compaq ProLiant 3000 Especificaciones Pagina 43