Compaq ProLiant BL20p Guía de instalación descargar pdf (Pagina 49)

Configuring and Deploying Server Blades

3-12 Compaq ProLiant BL20p Server Blade Setup and Installation Guide

COMPAQ CONFIDENTIAL

Writer: Christine Portillo File Name: d-ch3 Configuring and Deploying Server Blades.doc

Codename: AvX Part Number: 307131-001 Last Saved On: 11/1/02 1:03 PM

Client PC Requirements

To use iLO to access the server blade, you must use a client PC with the following

minimum software and hardware requirements:

• Intel Pentium III or higher processor (700 MHz or greater recommended)

• Microsoft Windows 2000 Professional or Microsoft Windows XP operating

system

• Microsoft Internet Explorer 5.5 or above with 128-bit encryption

• Ethernet NIC with 10/100 RJ-45 connector

• TCP/IP networking and an IP address compatible with one of the following:

— The iLO Diagnostic Port IP address

— An assigned DHCP or static IP address

• CD-ROM drive and/or diskette drive

• Java Runtime Environment version 1.3.1, available at

www.compaq.com/manage/jvm.html

iLO Guidelines for Accessing the Server Blade

Use the following guidelines when you prepare to access the server blade with the

iLO Remote Console for the first time.

Direct Cabling Method

To use the Remote Console graphical interface with the direct cabling method for the

first time, you must do the following:

1. Locate the iLO Default Network Settings tag on the server blade.

2. Locate the static IP address on the diagnostic cable label.

The default TCP/IP address for the iLO Diagnostic Port is 192.168.1.1; the

default subnet mask is 255.255.255.0.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 107 108

Sin comentarios

Compaq ProLiant BL20p Guía de instalación Pagina 49