Compaq ProLiant BL20p Guía de instalación descargar pdf (Pagina 50)

Configuring and Deploying Server Blades

Compaq ProLiant BL20p Server Blade Setup and Installation Guide 3-13

COMPAQ CONFIDENTIAL

Writer: Christine Portillo File Name: d-ch3 Configuring and Deploying Server Blades.doc

Codename: AvX Part Number: 307131-001 Last Saved On: 11/1/02 1:03 PM

To connect to the server blade with the diagnostic cable, refer to Chapter 2,

“Installing the Server Blade and Options.”

Network Cabling Method

With the network cabling method, the iLO default configuration enables the server

blade to obtain its IP address from the DHCP server. However, if you have changed

the default configuration to use a static IP address, iLO continues to use the static IP

address when you connect with the network cabling method.

To connect the server blade to the diagnostic station and network, refer to the

documentation that ships with the diagnostic station.

Browser Capability

Be sure that the IP address and subnet mask of the client PC are compatible with the

IP address and subnet mask of the iLO diagnostic port. In addition, be sure that the

browser does not use a proxy server with the same IP address and subnet mask as the

iLO diagnostic port.

Accessing the Server Blade with iLO Remote Console

To access the server blade with iLO for the first time:

1. Locate the iLO Default Network Settings tag that contains the following

information:

a. Default user ID

b. Default password

c. DNS name

d. Server blade serial number

IMPORTANT: If you have previously configured the iLO settings to change the default

DNS name, user ID, or password, use the values you configured. If you made any

changes to the default value, the values on the iLO Default Network Settings tag are no

longer valid.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 107 108

Sin comentarios

Compaq ProLiant BL20p Guía de instalación Pagina 50