Compaq StorageWorks 4000 - RAID Array Guía de usuario descargar pdf (Pagina 41)

Compaq StorageWorks RAID Array 4000 User Guide

The StorageWorks RAID 4000 supports the Storage Hub 7 or the Storage

Hub 12.

The Storage Hub 7 provides a central point of connectivity for the Fibre

Channel Arbitrated Loop and should be mounted in a convenient location.

To install the Storage Hub 7:

1. Find a convenient location in the rack or at another location. For more

information on mounting the Storage Hub in a rack, refer to the

documentation that came with the device.

2. Install a GigaBit Interface Converter (GBIC) module in each Storage

Hub 7 receptacle to be used.

Figure 2-10. Storage Hub 7 receptacle locations (rear view)

3. Connect Fibre Channel cables to the GBIC modules installed at the

Storage Hub 7.

Make certain that the Fibre Channel cables are supported with cable

ties or other supports so that little weight is placed on the Fibre Channel

connectors. This is necessary to prevent a cable bend radius of less than

3 inches at the connector or along the cable.

4. Check all cable connections to make sure they are tightly seated.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 179 180

Sin comentarios

Compaq StorageWorks 4000 - RAID Array Guía de usuario Pagina 41