Compaq StorageWorks 4000 - RAID Array Guía de usuario descargar pdf (Pagina 94)

Running the Array Configuration Utility

When creating a logical drive, you can select a fault-tolerance (RAID level)

option and provide information regarding the drive size, array accelerator, and

stripe size.

1. Select Array A or the Unused Space icon under Array A in the Logical

Configuration View.

2. Click the Create Logical Drive button. A screen similar to the following

figure is displayed.

Figure 6-7. Create Logical Drive screen

3. In the upper-left area of this screen, click the Distributed Data Guarding

(RAID 5) option button.

4. Click the Array Accelerator Enable button.

5. Stripe Size can be left at the default for the selected RAID level, or set

to another value. See the section titled “Creating Logical Drive Screen”

later in this chapter for a detailed description.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 179 180

Sin comentarios

Compaq StorageWorks 4000 - RAID Array Guía de usuario Pagina 94