Compaq StorageWorks 4000 - RAID Array Guía de usuario descargar pdf (Pagina 83)

Installing the Redundant Power Supply Option

3. Align the power supply with the rail in its opening and push the supply

in as far as it will go 1.

4. Pivot the handle closed until it latches into place 2. This secures the

supply in the chassis.

Figure 5-2. Installing the redundant power supply

To reduce the risk of electric shock or damage to the equipment:

■ Do not disable the power cord grounding plug. The grounding plug is an

important safety feature.

■ Plug the power cord into a grounded (earthed) electrical outlet that is

easily accessible at all times.

■ Disconnect power from the storage system by unplugging all power cords

from either the electrical outlet or storage system.

5. Plug the new AC power cord into the Redundant Power Supply, then

into a grounded AC outlet.

The Power LED on the Redundant Power Supply will be green, indicating that

there is AC power available to the new supply. The Status LED on each

supply will also be green, indicating that no fault is detected. When the LEDs

on both power supplies are green, the RA4000 is protected against power

supply failure.

This completes the installation of the Redundant Power Supply option.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 179 180

Sin comentarios

Compaq StorageWorks 4000 - RAID Array Guía de usuario Pagina 83