Compaq StorageWorks 4000 - RAID Array Guía de usuario descargar pdf (Pagina 62)

Troubleshooting

Failure to follow the instructions in this section can result in

component damage.

If the fan assembly LED is amber, the fan assembly must be replaced as soon

as possible.

Figure 4-10. Fan Assembly LED

See “Replacing Components” later in this chapter for important information on

how to replace this module.

Do not allow the RA4000 to operate for more than five minutes

without a working Fan Assembly in place. Operation longer than this with no

forced air cooling, especially in arrays with a full complement of drives, may

permanently damage the drives or electronics in the RA4000 and result in data

loss.

When hot-plugging the Fan Assembly, be sure to have everything ready before

you begin the procedure, which should normally take no more than one minute.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 179 180

Sin comentarios

Compaq StorageWorks 4000 - RAID Array Guía de usuario Pagina 62