Compaq 3200 Especificaciones descargar pdf (Pagina 115)

6-33

Compaq Smart Array 3200 Controller Reference Guide

Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002

File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Installing the Driver

To install the driver file to the OS/2 directory on your boot drive:

1. Place the OS/2 SSD diskettes in the floppy drive.

2. From the OS/2 command prompt, change the drive to A: by typing:

Then type:

Ddinstal

3. Click the Change button to change the source directory to A:/ADD.

4. Select Compaq Array Driver for OS/2 from the list of drivers. Click OK

to continue.

5. The CPQARRAY.ADD driver file will be copied to the x:\os2 directory

(where x is the boot drive). The CONFIG.SYS file will be updated to load

this driver first on boot. This means that the first drive on this controller

is the boot drive.

6. If you do not want to boot from a drive on this controller–for instance, if

you wanted to boot from a drive attached to the integrated SCSI

controller–you must manually change the CONFIG.SYS file before you

reboot the server. Edit the CONFIG.SYS file to reorder the

BASEDEV=CPQARRAY.ADD statement so that it appears after the

BASEDEV statement corresponding to the boot driver.

7. Save the updated CONFIG.SYS file and exit the editor.

8. Perform a normal system shutdown and reboot the server to load the new

driver.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 210 211

Sin comentarios

Compaq 3200 Especificaciones Pagina 115