Compaq DIGITAL Server Cluster Kits for Windows NT Guía de instalación descargar pdf (Pagina 38)

StorageWorks Secure Path for Windows NT

5–6 123995–002 EK–WNTMP–MH. D01

5.3.4 Installing an RA8000 or ESA12000 (Fibre Channel) and One Windows

NT Server

To establish two individual Fibre Channel busses between a single Windows NT host

server and a RAID subsystem, where one bus currently exists, reference Figure 5-4 and

follow these steps:

1. Install the host adapter in the server.

2. Connect the second hub to the second host adapter and to the second controller.

NOTE

You must use only one set of ports in the controller pair.

3. Reboot the host server.

The Secure Path solution is now properly prepared and cabled.

Figure 5–4 Secure Path Hardware Interconnect – Fibre Channel Single Server

KGPSA

Fibre Host

Bus

Adapters

Windows NT

Server

Fibre RA8000

Subsystem

(2 controllers)

Fibre Cable

Fibre Hub

SHR-1278

Additional

Hardware

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 73 74

Sin comentarios

Compaq DIGITAL Server Cluster Kits for Windows NT Guía de instalación Pagina 38