Compaq ProLiant DL380 Generation 2 Guía de usuario descargar pdf (Pagina 44)

Hardware options installation 44

•

The SCSI ID for each hot-plug hard drive is set automatically to the next sequential ID number in a

series beginning with ID0.

• If only one SCSI hard drive is used, install it in the bay with the lowest number.

• Hot-plug hard drives must be either Wide Ultra2, Ultra3, or Ultra320 SCSI types. Mixing these types

with other drive standards degrades the overall performance of the drive subsystem.

• Drives must be the same capacity to provide the greatest storage space efficiency when drives are

grouped together into the same drive array.

SCSI IDs

The server supports single- or dual-channel hard drive configurations. The single-channel configuration

(simplex) supports up to six hard drives on one channel. The dual-channel configuration (duplex) supports

two hard drives on one channel (SCSI IDs 0 and 1) and up to four hard drives on the other channel (SCSI

IDs 2 through 5).

The SCSI IDs for both simplex and duplex configurations are illustrated. Always populate hard drive bays

starting with the lowest SCSI ID.

Removing a SCSI hard drive blank

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays

are populated with either a component or a blank.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 121 122

Sin comentarios

Compaq ProLiant DL380 Generation 2 Guía de usuario Pagina 44