Compaq ProLiant DL380 Generation 2 Guía de usuario descargar pdf (Pagina 58)

Hardware options installation 58

Remove the PCI riser cage.

Expansion board options

NOTE: This procedure shows images of the SCSI model server, but it also applies to the SAS model server.

The server supports PCI, PCI-X, and PCI Express expansion boards. PCI hot-plug capability is available on

some expansion slots.

NOTE: PCI Express applies only to SCSI models.

For instructions on installing a RILOE II board, refer to the HP Remote Insight Lights-Out Edition II User

Guide on the Documentation CD.

IMPORTANT: It is recommended that the optional RILOE II board be installed in slot 1. If you plan to install

a RILOE II board in the future, leave slot 1 unpopulated.

Removing expansion slot cover 1

1. Power down the server (on page 27).

2. Extend or remove the server from the rack ("Extend the server from the rack" on page 28).

3. Remove the access panel ("Removing the access panel" on page 29).

4. Remove the PCI riser cage ("Removing the PCI riser cage" on page 57).

CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all

AC power cords before removing or installing the PCI riser cage.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 121 122

Sin comentarios

Compaq ProLiant DL380 Generation 2 Guía de usuario Pagina 58