Compaq Compaq Portable II Especificaciones descargar pdf (Pagina 78)

To remove the fixed disk drive controller board:

1. Complete the Board Slots Access Plate Removal procedure (see Section 7.4).

2. Disconnect the two fixed disk drive controller board signal cables by

pulling the connectors away from the board (Figure 7.9-2).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

CAUTION

Pull only on the connector, do not pry. Pulling on the wire makes the

connector grip the pins tighter, which will damage the connector.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

3. Remove the retaining screw that secures the fixed disk drive controller

board. Gently pull the board up and out of its J103 socket on the system

board and out of the computer. (Figure 7.9-3).

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 128 129

Sin comentarios

Compaq Compaq Portable II Especificaciones Pagina 78