Compaq DS10 Instrucciones de operaciones descargar pdf (Pagina 35)

Operations 1-23

1.7 Switching Between Operating Systems

The system supports multiple operating systems on different

system and data disks not in the machine at the same time. That

is, you can have a set of disks for each operating system.

CAUTION: This operation is not for the faint hearted especially if you have a

shadow system disk and shadow arrays. The file structures of the

operating systems are incompatible and therefore all disks must be

removed from the system and upon reinstallation must be replaced

in exactly the same physical locations. It is therefore necessary to

keep track of the location of each disk in the system.

1.7.1 Switching to Tru64 UNIX or OpenVMS

Use the following procedure:

Shut down the operating system and power off the system.

Remove and mark the physical location of each disk in the system.

Either place blank disks or your Tru64 UNIX or OpenVMS disk set into the

system. No matter which disk set you are placing into the system, be

sure that each disk is placed in the same physical location from

which it was removed.

Power on the system.

Set the operating system at the console prompt (see Section 2.18.11).

Press the Halt/Reset button to reset the system.

Either install Tru64 UNIX (see Section 1.4) or OpenVMS (see Section 1.6) or

boot the operating system.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 181 182

Sin comentarios

Compaq DS10 Instrucciones de operaciones Pagina 35