Compaq 370 Guía de instalación descargar pdf (Pagina 106)

Installing Hardware Options 4-27

Compaq Confidential – Need to Know Required

Writer: Gilbert Saldivar Project: Compaq ProLiant ML370 Setup and Installation Guide Comments:

Part Number: 120137-002 File Name: e-ch4 Installing Hardware Options Last Saved On: 12/10/99 12:22 PM

The PPM is keyed to ensure correct alignment. A notch in the center of the

module’s bottom edge must align with a tab in the mounting bracket.

1. Align the key slot in the bottom edge of the PPM with the tab in the

expansion slot. The module will not seat properly if it is turned the

wrong way.

2. Open the latches , and insert the module straight into the socket on the

system board

Figure 4-24. Installing a Processor Power Module (PPM)

3. Press the module into the socket until the latches click shut. The module

should now be seated securely in the socket.

4. Replace the large access cover.

5. For the rack model, push the server into the rack, secure the

thumbscrews, and reconnect cables.

6. Power on the server and use the System Configuration Utility to

reconfigure your system.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 185 186

Sin comentarios

Compaq 370 Guía de instalación Pagina 106