Compaq 370 Guía de instalación Pagina 124

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 186
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 123
5-10 Compaq ProLiant ML370 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq ProLiant ML370 Setup and Installation Guide Comments:
Part Number: 120137-002 File Name: f-ch5 SCSI Cabling Instructions Last Saved On: 12/10/99 12:28 PM
Running Internal and External Drives
Optional mass storage SCSI devices such as Compaq ProLiant
Storage Systems can be connected to the server by using the external SCSI
connector on the back of the unit. To connect to an external storage device as
shown below, refer to the installation documentation provided with the
external storage device.
1. Disconnect all devices, including the three-device, terminated SCSI
cable, from SCSI port 1.
2. If it is not connected already, connect the hot-plug hard drives to SCSI
port 2
with the point-to-point cable provided with your server, as
shown below. This will be the only internal cabling present with this
cabling configuration.
1
2
Figure 5-6. Connecting SCSI port 2 to the drive cage
3. Connect the external SCSI connector on the rear panel of the server to
the external SCSI connector on the rear panel of the storage system.
Vista de pagina 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 185 186

Comentarios a estos manuales

Sin comentarios