Compaq Armada 1120T Guía para resolver problemas descargar pdf (Pagina 149)

o Display panel

o Display cable

o Shield

o Display ground cable

Removing the CTFT (10.4 in) Display Panel

To remove the CTFT (10.4 in) panel, follow these steps:

1. Turn the computer off and remove all external devices, including the

battery pack and the AC Adapter. Remove the diskette and PC Card, if

installed (Section 5.3).

2. Open the computer.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

To prevent damage to the trough, ensure that the trough does not tilt

forward into the CPU base when the bezel is removed.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

3. Remove the display bezel (Section 5.19).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

The computer becomes top-heavy when the keyboard assembly is removed and

the display is opened. To prevent damage to the display and the computer,

be sure to support the display assembly when it is fully opened at

approximately a 135-degree angle.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

4. Open the display to its fully open position of approximately 135

degrees (Figure 5-98).

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 197 198

Sin comentarios

Compaq Armada 1120T Guía para resolver problemas Pagina 149