Compaq Armada 1120T Guía para resolver problemas descargar pdf (Pagina 78)

6. To install the handle bracket, reverse the previous steps. Discard the

old screws and replace with new screws.

Tilt Feet

This procedure is necessary if replacing the tilt feet or if separating the

display assembly from the system unit module.

Removing the Tilt Feet

To remove the tilt feet, follow these steps:

1. Turn the computer off and remove all external devices, including the

battery pack and the AC Adapter. Remove the diskette and PC Card, if

installed (Section 5.3).

2. Remove the tilt foot screw (Figure 5-9). Screws from the tilt feet are

not reusable and must be discarded.

3. Remove the tilt foot (Figure 5-9).

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 197 198

Sin comentarios

Compaq Armada 1120T Guía para resolver problemas Pagina 78