Compaq Armada 1120T Guía para resolver problemas descargar pdf (Pagina 154)

3. Remove the keyboard assembly (Section 5.7).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

The ZIF connector and its attached cable can be damaged easily. Handle

only the connector slide when disconnecting the ZIF connector. Never pull

or twist the cable itself while it is seated in the ZIF connector.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

To prevent damage to the trough, ensure that the trough does not tilt

forward into the CPU base when the bezel is removed

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

4. Remove the display cable from the system board by pulling up both ends

of the ZIF connector slide simultaneously [1], carefully opening the

slide [2] (Figure 5-104).

5. Lift the display cable out of the connector slide [3], being careful

not to pull or twist the cable (Figure 5-104).

6. Remove the display bezel (Section 5.19).

7. Remove the inverter board (Section 5.19).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 197 198

Sin comentarios

Compaq Armada 1120T Guía para resolver problemas Pagina 154