Compaq Armada 1120T Guía para resolver problemas descargar pdf (Pagina 160)

11. To replace the display ground cable, reverse the previous steps.

Display Enclosure

This section provides replacement procedures for the display enclosure.

Replacing the Display Enclosure

To replace the display enclosure, follow these steps:

1. Turn the computer off and remove all external devices, including the

battery pack and the AC Adapter. Remove the diskette and PC Card, if

installed (Section 5.3).

2. Remove the handle brackets (Section 5.4).

3. Remove the tilt feet (Section 5.5).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

The computer becomes top-heavy when the keyboard assembly is removed and

the display is opened. To prevent damage to the display and the computer,

ensure that the display assembly is opened at a 90-degree angle.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

4. Remove the keyboard assembly (Section 5.7).

5. Remove the right clutch ground clip located between the clutch and the

CPU base (Figure 5-110).

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 197 198

Sin comentarios

Compaq Armada 1120T Guía para resolver problemas Pagina 160