Compaq Armada 1120T Guía para resolver problemas descargar pdf (Pagina 90)

2. Angle the front end of the keyboard assembly into place at the front

edge of the system unit module.

3. Ensure that the front plastic seams of the keyboard assembly and the

front of the system unit module are aligned and flush with each other.

4. Carefully lower the rear of the keyboard assembly to the system unit

module and press the outside rear corners until the keyboard assembly

snaps into place.

5. Verify the alignment of the keyboard assembly to the computer base.

Check the seams between the front and side edges of the computer base

and the keyboard assembly. If the seam is uneven, remove the keyboard

assembly and correctly align the tabs and recesses.

6. Press firmly in the center of the keyboard assembly below the status

panel [1] to connect the keyboard connector [2] to the system board [3]

(Figure 5-24).

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 197 198

Sin comentarios

Compaq Armada 1120T Guía para resolver problemas Pagina 90